Power Adapter

Product Details:

"The Official USB type C 15.3W Power Supply For Raspberry Pi 4 is Latest formally released electricity supply for all new Raspberry Pi four Model. It is compatible with Indian sockets operate on 90V to 230v AC and gives strong 5V 3A power to the Pi.
The adapter comes with 1.5m 18 AWG captive cable with USB-C output connector. The layout of the adapter with a Raspberry LOGO engraved on the top which makes it one-of-a-kind from any other adapter available in the market.
Features:Good Quality material96-230Vac operating input range50,000 hours MTBF6-month warranty.USB-C connection goes straight into your Raspberry Pi
Package Includes:1 x Official USB type C 15.3W Power Supply For Raspberry Pi 4
Specifications :Input Supply Range 100V to 230V AC @50hz
Output Voltage +5.1V DC
Minimum load current 0A
Max. Output Current 3.0A
Maximum power 15.3W
Cable Length 1.5 Meter
Efficiency 81% minimum (output current from 100%, 75%, 50%, 25%)
Protection Short circuit protectionOvercurrent protectionOver temperature protection
Colour White
Output Plug USB Type-C
Load regulation ±5%
Line regulation ±2%
Ripple & noise 120mVp-p
Weight (g) 114
Shipment Weight 0.15 kg
Shipment Dimensions 10 × 8 × 5 cm"

Product Details:

Features:-SB Mini-B connector breakout board, bottom view with dimensions-This board breaks out the VBUS, GND, D-, D+ and ID pins of a USB Mini-B connector. The VBUS and GND pins can be used to power your project from USB, while the D- and D+ pins give you access to the USB’s differential data signal. Each of these pins, along with the ID pin, are broken out into a 1×5 row of 0.1"-spaced pins on the board. The included 1×5 straight male header can be soldered to these pins to allow the board to be used with perfboards, solderless breadboards, and 0.1" connectors.-This tiny unit measures only 0.52" × 0.85" (0.55" × 0.85" including its USB mini-B connector) and has four 0.086" diameter mounting holes for #2 or M2 screws.-We also carry a USB Micro-B connector breakout board, and we have two power muxes that double as USB Micro-B breakout boards: the FPF1320 carrier and the TPS2113A carrier. These latter two power multiplexers make it easy to have a device that can be powered from both USB and an external supply.

Product Details:

"12 Volt 1 Amp Power Adapter takes an AC INPUT of 100-240V and gives 12V 1A DC output
12 Volt DC 1 Amp power supply is suitable for powering a wide range of applications including CCTV cameras, wireless routers, Robotics and DIY kits.

Features:-Excellent QualityShort Circuit, Over Voltage & Over Current ProtectionIncredibly Low Fault RatesPower Supply for LED, SMD, LED Strip, RGB LED StripIdeal for Routers / Modems / Mobile Phones / Mp3 players / POS Machines etcNo Minimum LoadThis power supply is a regulated Center Positive power supplyIt's plug design is for Indian power socket so, no plug converter is requiredCompact size & light weightHigh ReliabilityRegulated Stable VoltageGood quality SMPS Based AdapterStabilized Output, low ripple & low interferenceSingle Output VoltageHigh Efficiency & low energy consumption

Specifications:-Input - 100-240 VAC 50/60Hz  Category - Switch Mode Power Adaptor (SMPS)Output Type - DCOutput - 12Volts 1Amp"