Wires and Cables

Product Details:

"Micro HDMI To VGA Converter Cable With Audio For Raspberry Pi 4
This Micro-HDMI to VGA cable possess excessive-performance conversion chip, gold-plated Micro-HDMI male head and standard VGA girl head. It may be used for stable conversion between the two interfaces and supports 1080P 60Hz HD photo best. It also possesses audio holes that may be linked to the headsets and audios. This Micro-HDMI to VGA cable is easy to install, no need outside energy and may be used when well inserted.
Package Includes:
1 x Micro HDMI To VGA Converter Cable With Audio For Raspberry Pi 4"

Product Details:

"Description :50cm U.FL / IPX to RP-SMA Antenna Pigtail Jumper Cable
Specification :Cable type: 1.13Connector: RP-SMA Female ( Male Pin )Length:20 inch/ 50cm
Package included :1 × RP SMA female"

Product Details:

"This GPS/GLONASS GNSS Antenna is designed for applications which require excessive positioning accuracy through combining signals from GPS, GLONASS, structures. The tiny size of this antenna lets in it to be used in very space constrained environments. With three-meter lengthy cable, one can use this antenna to decorate the GPS Signals in an indoor assignment with Raspberry Pi HAT or Arduino Shield.  The Antenna has a flat magnetic floor to preserve it steady at one region quickly, or it may permanently stick with any surface  with assist of Double Sided Tape
A excessive gain huge-band patch antenna on an fundamental floor provides dependable overall performance. A completely IP67 water-proof rated and UV resistant enclosure permits use in outside environments. Mid SAW filter configuration gets rid of capability. LNA burn-out from close by out of band radiated strength bursts from other antennas that may be co-placed nearby. The antenna is manufactured to strict first tier Automotive best controlled the manufacturing system.
Features:The antenna assembly consists of a patch antenna for receiving GNSS signals and a preamplifier for signal amplification.Power supply to the antenna preamplifier must be provided by the application on the same RF signal trace as the GNSS RF signal is carried to the application.The antenna has an internal magnet so that it can be fixed on a metallic surface.Easy to use an antenna. Does not require RF or antenna knowledge.
Package Includes:1 x GPS/GLONASS GNSS Antenna for Raspberry Pi HAT and Arduino Shield with 3 Meter Cable
Specifications:Operating Frequency 1575.42 Mhz
LNA gain(without cable) 27dB
Typical noise figure 1.5dB
Operating Voltage Range 3~7 VDC
Operating Current 15mA
Max.GSM Working Frequency 824-894/1710-1880 MHz
VAWR 2:1
Impendence 50 Ohms
Peak gain 2dBi at 900mhz,2dBi at 1800mhz
Azimuth Omni-directional polarization, linear polarization
Protection IP67
Connector SMA-Male
Cable Length 3 Meter
Color Black
Cable Thickness 2.6 mm
Weight (gm) 60
Shipment Dimensions 12 × 8 × 4 cm 
"

Product Details:

"This is HL-340 USB serial port (COM) USB to RS232 USB Nine Serial Line Support Windows 7-64. USB to RS232 conversion cable for USB and serial devices without problems connect serial gadgets with features inclusive of Plug and play, hot-swappable.
Can meet the notebook connected to the serial tool, observe to mini-phones, virtual cameras, communication MODEM, ISDN terminal adapters, LED manipulate card.
Features :Single crystal 12M Tablet 340 USB port to serial port communication.USB1.1/2.0 compliant solution.Built-in 128 byte TX/512 byte RX buffer.Supports the auto-Handshake Protocol.Support Win95/98/98se/ME/2000/XP/win7 32bit 64bit/Vista/supports full-speed USB data transfer protocol.Design of electromagnetic interference.Data Exchange application.
Package Includes :1 x HL-340 USB serial port (COM) USB to RS232 USB Nine Serial Line Support Windows 7-64.
Specifications:Connector Type HL-340 USB serial port (COM) USB to RS232 USB
Gender Male
No. of Pin 9
Total cable length (cm) 84
Weight (gm) 53
Shipment Dimensions 10 × 6 × 3 cm"

Product Details:

This is the combo of 20 CM 40 Pin Dupont Cable Color Jumper Wire, 2.54mm 1P-1P M/M, M/F, F/F 40PCS of wire in each strip of cable. It is very Flexible and easily detachable to no. of wires according to your requirement. It is compatible with 2.54 mm spacing pin headers.This 20CM Dupont Wire Color Jumper Cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering.Mostly it can be used for Orange Pi, Banana Pi, Raspberry Pi, Arduino, and other mini pc and development board. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections.Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Features:-Compatible with 2.54mm spacing pin headers-40pcs chromatic color jump wire-High quality and in good working condition-Durable and reusable-Easy to install and use-A popular choice for construction or repair-Be used for the electronic project and Genuine Arduino product-Flexible Breadboard Jumper Cable Wire allows you to plug and unplug easily for prototyping. 

Product Details:

Specifications:

• These wires can be connected to any header with a 2.54mm(0.1") pitch
• Handy for making wire harnesses or jumpering between headers on PCB's
• They have 0.1" sockets on either end and fit cleanly next to each other on standard-pitch header
• For best results, when plugging these in a line, have the sides with the 'silver latch bit' sticking out since that side is a tiny bit wider

Product Details:

Specifications:

• Length: 300mm(12")
• Female to female wires suitable for prototyping
• These wires can be connected to any header with a 2.53 mm(0.1") pitch
• Handy for making wire harnesses or jumpering between headers on PCB's
• They have 0.1" sockets on either end and fit cleanly next to each other on standard-pitch header
• For best results, when plugging these in a line, have the sides with the 'silver latch bit' sticking out since that side is a tiny bit wider

Product Details:

Specifications:

• Quick prototyping
• Male to male wires suitable for prototyping
• These wires can be connected to any header with a 2.54mm(0.1") pitch
• Handy for making wire harnesses or jumpering between headers on PCB's
• They have 0.1" sockets on either end and fit cleanly next to each other on standard-pitch header
• For best results, when plugging these in a line, have the sides with the 'silver latch bit' sticking out since that side is a tiny bit wider

Product Details:

Specifications:

• Connect DB9 Serial Devices
• RS232 modem cable
• 9 Pin male to Female
• Serial Data Cable
• This Null modem cable is used to transfer data between 2 serial ports, such as 2 PC's